Home

/

/

Carbon Steel Sheet

Packed carbon steel sheets in stacks

Carbon Steel Sheet

Cold rolled and hot rolled carbon steel sheet, from 0.2 mm thin sheet to 6 mm HR sheet. We cut sheet from coil to your size on our in-house processing lines.

Cold rolled sheet 0.5–3.0 mm standard, 0.2–4.0 mm on request

Hot rolled and pickled sheet 1.5–6.0 mm standard

ASTM A1008, ASTM A1011, JIS G3141 SPCC, JIS G3131 SPHC and EN 10130

Mill test certificate with every order; quotations in 2–4 working hours

Why Buy Carbon Steel Sheet From MTS


Cut From Coil to Your Size

We level and cut steel sheets to the width and length you need. You get blanks close to your part size, so less goes to scrap.

Flat Enough for Your Laser

We level sheet to 5–7 mm/m and cut length to ±2–3 mm. It loads straight onto your laser bed or press brake.

Common Sheet Sizes Ready to Cut

Most buyers order one of these sizes. We cut other sizes to order.

• 1000 × 2000 mm
• 1219 × 2438 mm (4 × 8 ft)
• 1250 × 2500 mm
• 1500 × 3000 mm

Surface Protection on Request

Cold rolled sheet comes oiled as standard. For visible parts, we add PVC film or protective paper.

Shipped From Three Ports

Processed orders usually ship in 8–12 working days from Shanghai, Qingdao or Tianjin.

Packed carbon steel sheets in stacks

Flat Sheet Metal for Parts You Can See and Bend

Carbon steel sheet is the raw material behind cabinets, enclosures, brackets, panels and trailer bodies. It is thin enough to bend and punch, yet strong enough to carry load once formed.

Weldable sheet metal in low carbon grades takes paint, powder coat and zinc well. That makes it the everyday choice for sheet metal panels and parts. Thin sheet metal under 1 mm suits covers, ducts and light stampings.

The choice that matters most is cold rolled or hot rolled. Cold rolled sheet gives you surface quality, accurate size and good forming. Hot rolled sheet gives you general structural use, easy processing and a lower price.

Request a Quote

Cold Rolled Steel Sheets


Packed carbon steel sheets in stacks

ASTM A1008 Sheet

The US standard for cold rolled carbon steel sheet. It replaced ASTM A366. We supply CS (commercial steel), DS (drawing steel) and DDS (deep drawing steel). A1008 CS Type B is the common choice for general bending.

Packed carbon steel sheets in stacks

JIS G3141 SPCC Sheet

The Japanese standard for cold rolled commercial sheet. In India and South Asia, buyers often call SPCC "CRCA sheet". SPCD and SPCE are the drawing and deep drawing grades.

Packed carbon steel sheets in stacks

EN 10130 DC01–DC05 Sheet

The European standard for cold rolled low carbon sheet. DC01 is for general forming. DC03, DC04 and DC05 suit deeper drawing.

Cold rolled sheet is reduced at room temperature after pickling. It is thinner, flatter and smoother than hot rolled sheet, with tighter thickness tolerance.

Hot Rolled Steel Sheets


ASTM A1011 Sheet

The US standard for hot rolled carbon steel sheet and strip. It covers CS, DS, SS (structural steel) and HSLAS designations. It replaced ASTM A569, A570 and A607.

JIS G3131 SPHC Sheet

SPHC is the Japanese commercial hot rolled grade. SPHD and SPHE are drawing grades. You can choose a black or pickled surface.

Pickled and Oiled Sheet

Hot rolled sheet with the scale removed, for cleaner painting and welding.

Example: ASTM A1008 CS Type B cold rolled sheet, 1.5 × 1219 × 2438 mm, oiled.

Hot rolled sheet is rolled thin on a hot strip mill, then cut from coil. It costs less and comes thicker than cold rolled sheet.

Carbon Steel Sheet Specifications


ProductThickness (mm)Width (mm)Length (mm)
Cold rolled sheet0.5–3.0 (0.2–4.0)1000 / 1219 / 1250 / 1500 (700–1850)2000 / 2438 / 2500 / 3000 (1000–6000)
Hot rolled sheet1.5–6.0 (1.2–12.0)1000 / 1250 / 1500 (600–2000)2000–6000
Pickled and oiled sheet1.5–6.0 (1.2–8.0)1000 / 1219 / 1250 / 1500 (750–1600)2000–6000

Figures in brackets are the full supply range. Thin cold rolled gauges and sizes outside the standard range need confirmation with us. The hot rolled range depends on grade.

How to Order Carbon Steel Sheet

Which Standard Should You Quote?

Quote the standard your customer or drawing uses. US drawings usually name A1008 for cold rolled and A1011 for hot rolled. Japanese and Asian drawings name SPCC or SPHC. European drawings name DC01 or DD11.

These standards are close but not identical. Chemistry limits, mechanical tests and tolerances differ. If your drawing names one standard, order to that standard.

A1008 vs A1011

A1008 is cold rolled. A1011 is hot rolled. Choose A1008 for exposed parts, tight bends and accurate thickness. Choose A1011 for thicker parts, structures and parts you blast or paint.

What Counts as Thin Sheet Metal?

Below 1 mm, sheet is usually cold rolled. Below 0.5 mm, handling becomes the main problem. Very thin sheet dents and creases easily, so we ship it on flat pallets with edge guards. If your part allows 0.6 mm instead of 0.5 mm, you often get a better price and flatter sheet.

Sheet or Coil?

If you use more than a few tons a month of one size, coil may cost less. You can then cut your own lengths. If you need several sizes or have no leveler, buy cut sheets.

Frequently Asked Questions


What is carbon steel sheet?

Carbon steel sheet is flat steel, usually under 6 mm thick, with carbon as the main alloying element. You can buy it cold rolled, hot rolled or pickled.

What is ASTM A1008?

ASTM A1008 is the US standard for cold rolled carbon steel sheet. We supply it in CS, DS and DDS.

What is ASTM A1011?

ASTM A1011 is the US standard for hot rolled carbon steel sheet and strip. It replaced ASTM A569 and A570.

Is SPCC the same as A1008 CS?

They are close equivalents for cold rolled commercial sheet. Chemistry and tests differ slightly, so order to the standard on your drawing.

What is the thinnest steel sheet you supply?

Cold rolled sheet goes down to 0.2 mm, confirmed per order. The standard range starts at 0.5 mm.

Request a Quote


We reply within 2–4 working hours with a price per ton, valid for 3 days.

Scroll to Top

Envíe su consulta hoy

Envíenos el grado, la medida, la cantidad y el puerto de destino que necesita. Para productos estándar, le enviamos una cotización en 2–4 horas hábiles.

Send Your Inquiry Today

Send us your required grade, size, quantity and destination port. For standard products, we will provide a quote within 2–4 working hours.