Home

/

/

Structural Steel Plate

Carbon steel plates stacked in the warehouse

Structural Steel Plate

Structural steel plate to Chinese, US, European, Japanese and Indian standards, for buildings, towers, bridges and machinery. We cut plate to size on our in-house processing lines, then ship it from our own warehouses.

ASTM A36, A283 Gr.C, A572 Gr.50, S235JR–S355JR, SS400, IS 2062

IS 2062 E250, E275, E300 and E350

Mill plate 4.5–60 mm as standard, 3–200 mm on request

Mill test certificate with every order; quotations in 2–4 working hours

Why Buy Structural Plate From MTS


Cut Parts, Not Just Plates

We laser, plasma or flame cut base plates, gussets, stiffeners and splice plates to your drawing. They arrive ready to drill and weld.

Many Standards, One Supplier

Your project may name A36, your fabricator may stock S355JR, and your client may know SS400. We supply and certify plate to the standard your project names.

Certified to the Grade You Order

The mill test certificate shows grade, heat number, chemistry, yield, tensile strength and elongation. We never substitute a grade without your written approval.

Need one plate certified to two standards, such as A36 and A572 Gr.50? We can arrange dual certification after checking that the plate meets both.

Wide and Long Plate

Mill plate comes up to 3000 mm wide and 12 m long. Fewer splices mean less welding on your site.

Shipped From Three Ports

Processed orders usually ship in 8–12 working days from Shanghai, Qingdao or Tianjin.

Carbon steel plates stacked in the warehouse

Strength You Can Design Around

Structural steel plate is sold on guaranteed strength. A designer picks a yield strength, such as 235 MPa or 355 MPa, and sizes every member around it. The plate must reach that value, every heat, every time.

That is why the grade name matters more than the price. Two plates can look identical and differ by 50% in yield strength. Ordering to the right standard, with the right certificate, keeps your structure safe and your inspector satisfied.

Send us your steel schedule. We’ll match each plate to its grade, thickness and certificate.

Request a Quote

Structural Steel Plate by Standard


Carbon steel plates stacked in the warehouse

ASTM A36 Plate

The most widely used US structural plate, 250 MPa minimum yield.

Carbon steel plates stacked in the warehouse

ASTM A572 Gr.50 Plate

High-strength low-alloy plate with 345 MPa minimum yield. Gr.42, 55, 60 and 65 are available on order.

Carbon steel plates stacked in the warehouse

ASTM A283 Gr.C Plate

Low and intermediate strength plate for tanks and general structures. Gr.D is available on order.

Carbon steel plates stacked in the warehouse

EN 10025 S235JR, S275JR and S355JR

European structural grades for buildings and machinery.

Carbon steel plates stacked in the warehouse

JIS SS400 Plate

The Japanese general structural grade, popular across Asia.

Carbon steel plates stacked in the warehouse

Chinese GB Equivalents

For Chinese-standard projects, we also supply the GB structural grades. The equivalents table shows where each one sits next to ASTM, EN and JIS grades.

Carbon steel plates stacked in the warehouse

IS 2062 E250–E350 Plate

The Indian standard for structural steel. E250 is the general grade. E350 is the high-strength grade for heavier loads.

Example: IS 2062 E250 BR plate, 12 × 2000 × 6000 mm; S355JR plate, 25 × 2200 × 12000 mm.

Structural Steel Plate Specifications


Min. yield classChina GBUSA ASTMEurope EN 10025-2Japan JISIndia IS 2062
~235–250 MPaQ235BA36, A283 Gr.C (205 MPa)S235JRSS400E250
~275 MPa——S275JR—E275
~300 MPa————E300
~345–355 MPaQ355BA572 Gr.50S355JRSM490 (reference)E350

Equivalents are close, not identical. Chemistry, testing and thickness rules differ between standards. Order to the standard your drawing names.

Choosing Structural Steel Plate Grades

Read the Grade Suffix

In EN grades, the letters after the strength show the impact test. JR means 27 J at +20 °C. J0 means 0 °C, and J2 means −20 °C.

Our standard supply is B or JR quality. Cold climates and dynamic loads need a lower test temperature. For J0, J2 or K2 quality, such as S355J2, we confirm per order.

Other Structural Standards on Your Drawing

Some projects name standards outside the main five. It helps to know what they mean:

  • AS/NZS 3678 Grade 250 and 350: Australia and New Zealand
  • CSA G40.21 44W and 50W: Canada
  • ASTM A656: high-strength plate for formed parts
  • ASTM A633: normalized high-strength plate
  • ASTM A992: a US standard for wide-flange shapes, often confused with plate

These standards set their own chemistry, tests and marking. A plate to one standard does not automatically meet another. Check with your engineer before you accept any alternative grade.

Old Standards Still in Circulation

ASTM A569 was a hot rolled commercial sheet standard. It was withdrawn and replaced by ASTM A1011 CS. If an old drawing names A569, ask for A1011 CS instead.

SAE Grades: 1018, 1020 and 1040 Plate

SAE grades such as 1018, 1020 and 1040 define chemistry only, under ASTM A830 for plate. They do not guarantee yield strength, so they are not true structural grades. 1020 matches Chinese 20# closely. 1040 sits between 35# and 45#. EN8 is the British grade with similar carbon.

Our standard medium carbon plate is 20#, 35#, 45# and 50#. We can confirm SAE 1040 or EN8 plate against the chemistry and your order. SAE 1018 is a low carbon grade, and we quote it on request.

When Strength Is Not Enough

For heavy loads in thinner sections, look beyond structural grades. Quenched and tempered S690QL offers 690 MPa minimum yield.

Frequently Asked Questions


What is structural steel plate?

Structural steel plate is carbon steel plate with a guaranteed minimum yield strength. It goes into buildings, bridges, towers and machinery.

What is IS 2062 steel plate?

IS 2062 is the Indian standard for hot rolled structural steel. E250 has 250 MPa minimum yield; E350 has 350 MPa.

Is Q355B the same as S355JR?

They are close equivalents with 355 MPa minimum yield. Both are impact tested at +20 °C. Chemistry and testing rules differ slightly.

What is the most common structural steel plate grade?

A36 in the Americas, S235JR and S355JR in Europe, SS400 in Japan and much of Asia, and IS 2062 in India.

Do you supply J2 or D quality structural plate?

Our standard supply is B or JR quality. J0, J2 and K2 qualities, such as S355J2, depend on mill resources and impact requirements. We confirm them per order.

Request a Quote


We reply within 2–4 working hours with a price per ton, valid for 3 days.

Scroll to Top

Envíe su consulta hoy

Envíenos el grado, la medida, la cantidad y el puerto de destino que necesita. Para productos estándar, le enviamos una cotización en 2–4 horas hábiles.

Send Your Inquiry Today

Send us your required grade, size, quantity and destination port. For standard products, we will provide a quote within 2–4 working hours.