Home

/

/

A36 Steel Plate

A36 steel plates stacked in the warehouse

A36 Steel Plate

ASTM A36 carbon steel plate for structures, frames, base plates and general fabrication. We cut A36 plate to size on our in-house processing lines, then ship it from our own warehouses.

Certified to ASTM A36, with A36 printed on the mill test certificate

Cut-to-length plate 1.5–12 mm; mill plate 4.5–60 mm as standard

Metric or inch thickness and sizes

Laser, plasma and flame cutting; quotations in 2–4 working hours

Why Buy A36 Plate From MTS


Certified to A36, Not "Equivalent"

We supply A36 plate made and certified to ASTM A36. The certificate names A36, with chemistry, yield, tensile and elongation values. You don't get a similar grade with an "equivalent" note.

Inch Sizes Cut on Our Lines

We cut plate to inch lengths and widths. Typical sizes are 48 × 96 inch (4 × 8 ft) and 60 × 120 inch (5 × 10 ft). For inch thicknesses, we supply the nearest metric gauge. For example, 1/4 in is about 6 mm, and 1/2 in is about 12–13 mm.

Cut Parts Ready to Weld

We laser, plasma or flame cut base plates, gussets and brackets to your DXF or DWG file. We can cut the holes at the same time.

A36 Plate, Coil and Bar in One Container

You can combine A36 plate with A36 hot rolled coil or A36 bar on one order.

Shipped From Three Ports

Processed orders usually ship in 8–12 working days from Shanghai, Qingdao or Tianjin.

Stack of A36 steel plates

The Plate Behind Most US Drawings

ASTM A36 is the most specified structural carbon steel in North America. When a US or Latin American drawing says “steel plate”, it usually means A36. Many fabricators simply call it “A36 metal”.

A36 is a mild steel with a guaranteed yield of 36 ksi (250 MPa). It welds without preheat in common thicknesses, bends cleanly and cuts well on any process. That makes it the safe choice for base plates, brackets, frames and trailer parts.

Send us your plate list in inches or millimeters. We’ll confirm sizes, cutting and lead time together.

Request a Quote

A36 Steel Plate Products


A36 hot rolled steel plate

A36 Hot Rolled Steel Plate

Mill plate with mill scale, the standard form of A36 plate.

Stack of A36 steel sheets

A36 Steel Sheet

A36 in thinner gauges, cut from hot rolled coil. For thin structural sheet, we also supply A1011 SS Grade 36.

A36 steel plates in stock

A36 Cut Parts

Base plates, gussets, stiffeners and flanges cut to drawing.

A36 checker plate with a raised tread pattern

A36 Checker Plate

For anti-slip A36 floor plate, send the pattern and size, and we'll confirm.

Example: ASTM A36 plate, 3/8 × 60 × 120 inch (supplied as 10 × 1524 × 3048 mm), black.

A36 Steel Plate Specifications


Chemical Composition for Plates (%)

Plate thicknessC maxMnP maxS maxSiCu min (if specified)
≤ 3/4 in (20 mm)0.25—0.040.050.40 max0.20
> 3/4 to 1-1/2 in (20–40 mm)0.250.80–1.200.040.050.40 max0.20
> 1-1/2 to 2-1/2 in (40–65 mm)0.260.80–1.200.040.050.15–0.400.20
> 2-1/2 to 4 in (65–100 mm)0.270.85–1.200.040.050.15–0.400.20

Values from ASTM A36, for reference. Check the current edition for your order.

How to Buy A36 Steel Plate

What Is A36 Steel?

A36 is a low carbon structural steel to ASTM A36. ASTM A36/A36M is the full designation; A36M is the metric version. ASME SA36 is the same steel for boiler and pressure codes, used for non-pressure parts.

The standard covers plates, shapes and bars. For plate, the chemistry tightens as thickness increases, so thick A36 plate still welds well.

A36 vs Q235B, S235JR and SS400

These grades are all close to A36 in strength and use. They are not interchangeable on a US drawing, though. If your project names A36, order A36. If an equivalent would save time, we’ll tell you. Nothing changes without your written approval.

A36 vs A572 Gr.50

A572 Gr.50 has a minimum yield of 50 ksi, against 36 ksi for A36. It lets you use thinner plate for the same load. Choose A36 for general fabrication. Choose A572 Gr.50 when weight or strength drives the design.

What Is "A36 Modified"?

Some buyers ask for “A36 modified” plate. This usually means A36 with an extra requirement, such as a higher minimum yield. Send the exact requirement, and we’ll confirm.

Dual certification, such as A36 with A572 Gr.50, is possible on order. We first check that the plate meets both standards.

Choosing A36 Plate Thickness

You buy plate by nominal thickness, such as 1/4 inch or 10 mm. Thickness tolerance follows ASTM A6/A6M for plate, confirmed on your order. For laser cutting and press brakes, check flatness as well as thickness.

Frequently Asked Questions


What is A36 steel plate used for?

Fabricators use A36 plate for base plates, brackets, frames, gussets, tanks, trailers and general work. It welds, cuts and bends easily.

What is A36 metal?

"A36 metal" is a common name for ASTM A36 steel. It is a low carbon structural steel with 36 ksi minimum yield.

Is A36 the same as mild steel?

A36 is a type of mild steel. Other mild steels include S235JR, SS400 and IS 2062 E250.

What thickness of A36 plate do you supply?

Cut-to-length plate 1.5–12 mm and mill plate 4.5–60 mm as standard. We check thicker plate, up to 200 mm, on request.

What affects A36 steel plate price?

Thickness, width, quantity, cutting and testing all affect price. Inch sizes cut from metric plate may add yield loss. Send your list for a current quotation.

Request a Quote


We reply within 2–4 working hours with a price per ton, valid for 3 days.

Scroll to Top

Envíe su consulta hoy

Envíenos el grado, la medida, la cantidad y el puerto de destino que necesita. Para productos estándar, le enviamos una cotización en 2–4 horas hábiles.

Send Your Inquiry Today

Send us your required grade, size, quantity and destination port. For standard products, we will provide a quote within 2–4 working hours.