Home

/

/

Hot Rolled Steel Plate

Carbon steel plates stacked in the warehouse

Hot Rolled Steel Plate

Hot rolled steel plate and HR sheet, as mill plate, cut-to-length plate or pickled and oiled sheet. We level and cut plate on our in-house processing lines, then ship it from our own warehouses.

Mill plate 4.5–60 mm as standard, 3–200 mm on request

Cut-to-length plate 1.5–12 mm, any length from 2000 to 6000 mm

A36, S235JR–S355JR, SS400 and SPHC

Mill test certificate with every order; quotations in 2–4 working hours

Why Buy Hot Rolled Plate From MTS


Leveled Flat for Your Cutting Table

We level cut-to-length plate to 5–7 mm/m and cut it to ±2–3 mm. It lies flat on your laser bed and feeds straight into your press brake.

Mill Plate and Coil Plate, One Source

Thick mill plate and thinner coil-cut plate come from the same warehouse. You don't need two suppliers for 6 mm covers and 40 mm base plates.

Lengths That Fit Your Shop and Container

You choose the length. We cut coil plate to any length from 2000 to 6000 mm. Mill plate comes in 6, 8, 10 or 12 m lengths.

Black or Pickled Surface

Black plate keeps its mill scale and costs least. Pickled and oiled sheet has no scale, so you weld and paint it cleanly.

Shipped From Three Ports

Processed orders usually ship in 8–12 working days from Shanghai, Qingdao or Tianjin.

Carbon steel plates stacked in the warehouse

The Lowest-Cost Route to Flat Steel

Hot rolling shapes steel above its recrystallization temperature. The steel stays soft while it is rolled, so mills can reduce it to almost any thickness at low cost. As it cools, it forms a blue-grey mill scale and shrinks slightly.

That makes hot rolled steel plate the default for structural and fabrication work. Its size is less exact than cold rolled sheet, and the surface is rougher. For frames, brackets, tanks and machinery, that rarely matters. The saving per ton does.

Tell us what the plate will become. We’ll suggest the right route, grade and size: mill plate, coil plate or pickled sheet.

Request a Quote

Hot Rolled Steel Plate Types


Carbon steel plates stacked in the warehouse

Hot Rolled Mill Plate

Plate rolled flat on a plate mill, in thick gauges and widths up to 3000 mm. For base plates, frames and heavy fabrication.

Carbon steel plates stacked in the warehouse

Cut-to-Length Plate From Coil

Hot rolled coil leveled and cut into plate. The most economical choice for thinner plate in custom lengths.

Carbon steel plates stacked in the warehouse

Hot Rolled Steel Sheet

HR sheet in SPHC, SPHD, SPHE and SS400, for enclosures, brackets and light structures.

Carbon steel plates stacked in the warehouse

Pickled and Oiled Sheet (HRPO)

Hot rolled sheet with the scale removed by acid, then oiled. Common sizes are 1219 × 2438 mm (4 × 8 ft) and 1250 × 2500 mm.

Carbon steel plates stacked in the warehouse

Structural Hot Rolled Plate

A36, S235JR and S355JR mill plate for buildings, bridges and frames.

Example: SS400 hot rolled plate, 10 × 1500 × 6000 mm, black, cut-to-length from coil.

Hot Rolled Steel Plate Specifications


ProductThickness (mm)Width (mm)Length (mm)
Mill plate4.5–60 (3–200; 200–400 by special confirmation)1500 / 1800 / 2000 / 2200 (600–3000)6000 / 8000 / 10000 / 12000 (2000–12000)
Cut-to-length plate1.5–12 (other gauges on request)1219 / 1500 / 2000 (300–2000)3000 / 6000 (2000–6000)
Hot rolled sheet1.5–6.0 (1.2–12.0)1000 / 1250 / 1500 (600–2000)2000–6000
Pickled and oiled sheet1.5–6.0 (1.2–8.0)1000 / 1219 / 1250 / 1500 (750–1600)2000–6000

Figures in brackets are the full supply range. Sizes outside the standard range need confirmation with us, and some are made to order.

How to Choose Hot Rolled Steel Plate

Hot Rolled vs Cold Rolled Sheet

Hot rolled sheet costs less and comes thicker. Cold rolled sheet is thinner, smoother and closer in tolerance. Cold rolled tops out around 4 mm. Above that, every sheet is hot rolled.

Choose HR sheet for welded and painted parts where looks matter less. Choose CR sheet for visible panels, precise bends and deep drawing. Many shops order HR and CR sheet together: HR for frames, CR for covers.

When to Pay for Pickled and Oiled

Mill scale is hard and brittle. It can flake off when you bend the sheet, and it wears laser nozzles. Paint over scale lifts over time. Pickled and oiled sheet costs a little more but saves blasting time. You also get cleaner laser cuts and better welds.

If you blast and paint every part anyway, black plate is fine. If you laser cut, bend and powder coat thin sheet, HRPO usually pays for itself.

Prime Plate Only

We supply only prime plate, with a mill test certificate. Secondary or overrun plate is not part of our range.

Flatness and Camber

Mill plate can carry some waviness and edge camber. We level coil plate on the line, so it is usually flatter in thinner gauges. For laser cutting, ask for leveled plate and state your flatness need on the order.

Hot Rolled Plate Thickness Tolerance

Thickness tolerance follows the product standard you order to:

  • USA: ASTM A6/A6M for plate
  • Europe: EN 10029
  • Japan: JIS G3193

Name the standard on your order. We’ll confirm the tolerance against it before production.

Frequently Asked Questions


What is hot rolled steel plate?

Hot rolled steel plate is carbon steel rolled at high temperature, then cooled. It has a mill scale surface and goes into structures, machinery and fabrication.

What is the difference between HR sheet and HR plate?

HR sheet is usually below about 6 mm thick. HR plate is thicker. Both come from the same hot rolling process.

What thickness of hot rolled plate can you supply?

Mill plate runs 4.5–60 mm as standard and up to 200 mm on request. Cut-to-length plate runs 1.5–12 mm.

Is HRPO the same as hot rolled steel?

HRPO is hot rolled steel pickled in acid to remove scale, then oiled. It is still hot rolled steel, with a cleaner surface.

Can I laser cut hot rolled plate?

Yes. We laser cut hot rolled plate up to 18 mm. Pickled plate gives cleaner edges than black plate.

Request a Quote


We reply within 2–4 working hours with a price per ton, valid for 3 days.

Scroll to Top

Envíe su consulta hoy

Envíenos el grado, la medida, la cantidad y el puerto de destino que necesita. Para productos estándar, le enviamos una cotización en 2–4 horas hábiles.

Send Your Inquiry Today

Send us your required grade, size, quantity and destination port. For standard products, we will provide a quote within 2–4 working hours.