Home

/

/

Mild Steel Plate & Sheet

Carbon steel plates stacked in the warehouse

Mild Steel Plate & Sheet

Low carbon mild steel plate and sheet in ASTM A36, S235JR, SS400 and IS 2062 E250. Sizes run from thin sheet to heavy plate. We cut MS plate to size on our in-house processing lines and ship it from our own warehouses.

Mild steel sheet 0.5–6.0 mm, cold rolled, hot rolled or pickled

Mild steel plate 4.5–60 mm as standard, up to 200 mm on request

Laser, plasma and flame cutting to your drawing

Mill test certificate with every order; quotations in 2–4 working hours

Why Buy Mild Steel Plate From MTS


Cut to Size, Not Just Sold by the Sheet

We cut mild steel plate to length, or laser, plasma or flame cut it before shipping. You can order full sheets, strips or finished blanks.

Every Common Thickness in One Order

Order 1 mm, 2 mm and 3 mm mild steel sheet with 6 mm, 10 mm and 20 mm plate. They load in the same container.

Standard Sheet Sizes

Most buyers pick one of these sheet sizes. Mill plate comes up to 3000 mm wide and 12 m long.

• 1000 × 2000 mm
• 1219 × 2438 mm (8 × 4 ft)
• 1250 × 2500 mm
• 1500 × 3000 mm

Grades That Match Your Drawing

A36, S235JR, SS400 and IS 2062 E250 are close in use. We certify the plate to the grade you order.

Shipped From Three Ports

Processed orders usually ship in 8–12 working days from Shanghai, Qingdao or Tianjin.

Carbon steel plates stacked in the warehouse

Why Mild Steel Is the Default Plate

Mild steel is low carbon steel, usually under 0.25% carbon. Thanks to that low carbon, it welds without preheat, bends without cracking and cuts cleanly.

It is not the strongest steel, and it rusts if left bare. But for frames, brackets, tanks, covers and machine bases, it does the job at the lowest cost per ton. That is why most fabrication shops stock mild steel sheet and plate first.

Tell us what you make. We’ll suggest a grade, thickness and surface that fit the job and the budget.

Request a Quote

Mild Steel Sheet


Carbon steel plates stacked in the warehouse

Cold Rolled Mild Steel Sheet

Smooth and accurate sheet for enclosures and visible panels.

Carbon steel plates stacked in the warehouse

Hot Rolled Mild Steel Sheet

Black sheet for brackets, floors and welded parts.

Carbon steel plates stacked in the warehouse

Pickled Mild Steel Sheet

Scale removed for clean painting and welding.

Carbon steel plates stacked in the warehouse

Black Mild Steel Sheet

Hot rolled sheet with mill scale. It is the lowest-cost surface if you blast or galvanize the parts.

Mild Steel Plate


Hot Rolled Mild Steel Plate

Mill plate and cut-to-length plate for structures and machinery.

Mild Steel Chequered Plate

Patterned plate for floors and stair treads.

Heavy Mild Steel Plate

Thick plate above 60 mm for bases and heavy frames.

Example: S235JR hot rolled mild steel plate, 6 × 1500 × 6000 mm. Example: SPCC cold rolled mild steel sheet, 1.2 × 1219 × 2438 mm.

Mild Steel Plate & Sheet Specifications


FormCommon thicknesses (mm)
Cold rolled sheet0.5, 0.8, 1.0, 1.2, 1.5, 2.0, 2.5, 3.0
Hot rolled / pickled sheet1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0
Plate6, 8, 10, 12, 16, 20, 25, 30, 40, 50, 60

We cut or roll other thicknesses to order. Sizes outside the standard range need confirmation with us.

How to Buy Mild Steel Plate and Sheet

Mild Steel, Low Carbon Steel or Carbon Steel?

“Mild steel” is the everyday name for low carbon steel. All mild steel is carbon steel, but not all carbon steel is mild. Medium carbon 1045 and high carbon SK85 are harder and need different handling.

Which Mild Steel Grade Should You Order?

If your drawing names a grade, use it. If not, follow your market’s habit:

  • Europe and the UK: S235JR or S275JR
  • USA and Latin America: A36
  • India: IS 2062 E250
  • Japan and much of Asia: SS400

All suit general welded fabrication.

If you need more strength in a thinner section, step up to S355JR or A572 Gr.50.

Mild Steel Plate Thickness for Common Jobs

These are typical starting points, not design values:

  • Covers, guards and enclosures: 1–2 mm sheet
  • Brackets and light frames: 3–6 mm
  • Base plates and gussets: 8–20 mm
  • Machine bases and heavy frames: 25 mm and above

Your engineer’s drawing always comes first.

16 Gauge and 18 Gauge Mild Steel

Gauge sizes are common in the US and UK. 16 gauge is about 1.5 mm and 18 gauge about 1.2 mm. Send us gauge sizes, and we’ll offer the nearest metric thickness for your approval.

Protecting Mild Steel From Rust

Bare mild steel rusts. For outdoor use, plan for painting, powder coating or hot-dip galvanizing after fabrication. For ready-coated sheet, look at galvanized or PPGI sheet instead.

Frequently Asked Questions


What is mild steel plate?

Mild steel plate is low carbon steel plate, usually under 0.25% carbon. It is easy to weld, bend and cut, so it suits structures and general fabrication.

What is the difference between mild steel plate and sheet?

Thickness. Sheet is usually under 6 mm; plate is thicker. Both use the same mild steel grades.

What thickness of mild steel plate do you supply?

Sheet from 0.5 mm, cut-to-length plate 1.5–12 mm and mill plate 4.5–60 mm as standard. Mill plate goes up to 200 mm on request.

Is MS plate the same as mild steel plate?

Yes. MS is short for mild steel. MS plate and MS sheet are common names in India, the Middle East and Southeast Asia.

Can mild steel plate be galvanized?

Yes. Mild steel plate galvanizes well after cutting and welding. Tell us if you will galvanize the parts, and we'll check the steel chemistry.

Request a Quote


We reply within 2–4 working hours with a price per ton, valid for 3 days.

Scroll to Top

Envíe su consulta hoy

Envíenos el grado, la medida, la cantidad y el puerto de destino que necesita. Para productos estándar, le enviamos una cotización en 2–4 horas hábiles.

Send Your Inquiry Today

Send us your required grade, size, quantity and destination port. For standard products, we will provide a quote within 2–4 working hours.