Home

/

/

ASTM A36 Hot Rolled Coil

Hot rolled steel coils in stock

ASTM A36 Hot Rolled Coil

A36 steel coil produced and certified to ASTM A36/A36M, for structural parts, welded tube and fabrication. We slit, level and rewind A36 coil on our in-house processing lines, so it arrives sized for your line.

Hot rolled A36 coil, standard 1.2–20 mm thick and 1250–2000 mm wide

Mill test certificate stating ASTM A36/A36M, with chemistry and tensile results

Slit to strips from 20 mm, or cut to sheets up to 16 mm thick

Metric or imperial sizes; quotations in 2–4 working hours

Why Buy A36 Coil From MTS


Certified to the Grade You Specify

Every coil ships with a mill test certificate that names ASTM A36/A36M. It lists heat number, chemistry, yield, tensile and elongation. Your inspector sees the standard on the page, not an "equivalent" note.

Processed to Imperial or Metric Sizes

Many A36 buyers work in inches. We slit and cut to inch widths and lengths, such as 48 × 96 in or 60 × 120 in sheets. Metric sizes are just as easy.

Coils That Fit American Equipment

Standard hot rolled coils sit on a 760 mm (30 in) ID and weigh 15–25 tons, up to 28 tons. If your decoiler takes 610 mm (24 in), or your crane lifts less, we rewind to suit.

Strip and Sheet From the Same Heat

One A36 coil can become slit strip for your tube mill and cut sheets for your fabrication shop. Both carry the same heat number and certificate.

Shipped From Three Ports

Processed A36 coil ships in 8–12 working days from Shanghai, Qingdao or Tianjin. Coils rolled to order take about 2–3 months.

Hot rolled steel coils in stock

A36: The Structural Grade Your Drawings Already Name

ASTM A36 is the most specified structural carbon steel in the Americas. Engineers like it because it is simple. It has a guaranteed minimum yield of 36 ksi (250 MPa) and welds without preheat in normal thicknesses. It also costs less than higher-strength grades.

Buying it in coil gives you that grade at the lowest processing cost. Feed it straight into a roll former, slit it for tube, or level it into sheets on your own line. If you do not have that equipment, we do it here before shipping.

The point to check is the paperwork. A36 is a US standard, and some buyers receive “A36 equivalent” steel with a different grade on the certificate. Ask for ASTM A36/A36M on the MTC, and that is what we ship.

Request a Quote

A36 Coil Products


Hot rolled steel coils in stock

A36 Hot Rolled Master Coil

Full-width A36 coil for plants with their own slitting or leveling lines. Standard widths 1250, 1500, 1800 and 2000 mm.

Hot rolled steel coils in stock

A36 Slit Coil

Narrow coils for tube mills, roll formers and stamping lines. Width tolerance is ±0.2 mm as standard. Example: A36 slit coil, 4.0 mm × 220 mm, for welded rectangular tube.

Hot rolled steel coils in stock

A36 Steel Sheet Cut From Coil

Leveled sheets up to 16 mm thick and 2000 mm wide, 2000–6000 mm long. Flatness is held to 5–7 mm/m. Example: A36 hot rolled steel sheet, 3/16 in × 48 in × 96 in.

Hot rolled steel coils in stock

A36 Pickled and Oiled Coil

A36 with the mill scale removed and a light oil film, ready for painting or powder coating. Pickled A36 is made to order; send your size and we will confirm.

A36 Specifications


Chemical Composition (ASTM A36/A36M, typical for plates and coil-processed sheet)

ElementRequirement
Carbon (C)0.25% max up to 40 mm; 0.26–0.29% max for thicker plate
Manganese (Mn)No requirement up to 20 mm; 0.80–1.20% above 20 mm
Phosphorus (P)per current ASTM A36 edition
Sulfur (S)per current ASTM A36 edition
Silicon (Si)0.40% max (above 40 mm: 0.15–0.40%)
Copper (Cu)0.20% min when copper steel is specified

Buying A36 Coil: What an Export Sales Director Would Tell You

A36 or A1011 SS Grade 36?

ASTM A36 is written for plates, shapes and bars. Thin hot rolled sheet and strip from coil usually fall under ASTM A1011 instead. For those gauges, American buyers often order A1011 SS Grade 36 Type 2, which matches A36 strength.

So check your thickness first. For heavier coil-processed sheet, A36 on the certificate is normal. For thin gauges, ask your engineer which standard the drawing really needs. We can certify to either, so you are not forced to accept a substitute.

A36 Compared With Q235B, SS400 and S275JR

GradeStandardMin. yieldTensileNotes
A36ASTM A36250 MPa400–550 MPaUS structural grade
Q235BGB/T 700235 MPa370–500 MPaChinese structural grade, impact tested at 20 °C
SS400JIS G3101245 MPa400–510 MPaNo chemistry limits on C or Mn
S275JREN 10025-2275 MPa410–560 MPaImpact tested at 20 °C

They do similar jobs, but they are not the same steel. If your customer, engineer or inspector names A36, buy A36. Use an alternative only with written approval, and get the certificate in the alternative’s own name.

Where A36 Coil Is Used

A36 coil goes into roll-formed purlins and girts, welded square and rectangular tube, and trailer and truck parts. It also feeds farm equipment, racking, brackets and base plates. Its strength is enough for most building work, and it welds and bends without fuss.

When A36 Is Not the Right Grade

If your design needs more than 36 ksi yield, look at A572 Grade 50 instead. For deep-drawn or hard-stamped parts, a forming grade such as SPHC or a cold rolled drawing grade works better. For heat-treated parts such as springs or blades, choose a high carbon grade like SK85.

Getting the Certificate Right

Before you pay, check four lines on the MTC: the standard (ASTM A36/A36M), heat number, yield and tensile results, and size. If any one differs from your order, ask before shipment, not after. We send certificates with the shipping documents, and earlier on request.

Frequently Asked Questions


Is A36 steel the same as mild steel?

A36 is a mild (low carbon) steel, with carbon up to about 0.25–0.29%. But "mild steel" is a general term. A36 adds a guaranteed minimum yield of 36 ksi and a defined tensile range. Ask for A36 by name when strength matters.

Can A36 hot rolled coil be welded?

Yes. A36 welds well with common processes such as MIG, stick and submerged arc. In normal thicknesses it needs no preheat. Thick sections and cold conditions may need preheat according to your welding procedure.

What is A36M?

A36M is the metric version of the same standard. ASTM A36/A36M states limits in both inch-pound and SI units. The steel is the same; only the units on the certificate change.

Is Q235B equal to A36?

They are close but not equal. Q235B has a lower minimum yield (235 MPa vs 250 MPa) and different test rules. Many projects accept either, but only with approval. If your drawing says A36, order A36.

What sizes of A36 coil do you supply?

The standard hot rolled range is 1.2–20 mm thick and 1250–2000 mm wide. We also slit coil from 20 mm wide and cut sheets up to 16 mm thick. Other sizes need confirmation with us.

How is A36 coil priced?

A36 follows the hot rolled coil market. Thickness, width, pickling and processing then add to the base. Send your size and quantity for a per-ton quote.

Request a Quote


We reply within 2–4 working hours with a price per ton, valid for 3 days.

Scroll to Top

Envíe su consulta hoy

Envíenos el grado, la medida, la cantidad y el puerto de destino que necesita. Para productos estándar, le enviamos una cotización en 2–4 horas hábiles.

Send Your Inquiry Today

Send us your required grade, size, quantity and destination port. For standard products, we will provide a quote within 2–4 working hours.