
HRPO Coil (Hot Rolled Pickled and Oiled)
Hot rolled pickled and oiled steel coil in forming and structural grades, from 1.5 mm to 6.0 mm thick. We slit and cut HRPO coil on our in-house processing lines, then ship it from our own warehouses.
Standard 1.5–6.0 mm thick; 1.2–8.0 mm on request
Standard widths 1000, 1250 and 1500 mm; 750–1600 mm on request
SPHC to SPHE, DD11–DD14, SS400, S235JR–S355JR
Mill test certificate with every coil; quotations in 2–4 working hours
Why Buy HRPO Coil From MTS
Clean Blanks Straight From Our Lines
We cut pickled sheets from 300 mm to 2000 mm wide, flat to 5–7 mm per meter. For strip, we slit HRPO coil from 20 mm wide, with a width tolerance of ±0.2 mm. The clean surface goes straight from our line to your press or paint shop.
Pickled, Hot Rolled and Cold Rolled in One Gauge
Between 1.5 mm and 2.0 mm, we stock pickled, hot rolled and cold rolled coil. You can compare surface and price on one quotation, and choose the cheapest steel that does the job.
Forming, Structural and Automotive Grades
We supply HRPO in JIS, EN and Chinese grades for forming and structural parts. Automotive SAPH and QStE grades are in stock as pickled coil too.
Coil Weight and ID That Fit
Standard coils come on a 760 mm ID, with 610 mm available. If your decoiler or crane needs smaller coils, we rewind to match.
Shipped From Three Ports
Processed orders ship in 8–12 working days from Shanghai, Qingdao or Tianjin. Every container is photographed before it is sealed.

A Clean Surface Without the Cold Rolled Price
Request a QuoteHRPO Coil by Grade

SPHC, SPHD and SPHE Pickled Coil (JIS G3131)
Forming grades from commercial to deep drawing quality, for brackets, housings and pressed parts. Often ordered as SPHC-PO.

DD11 to DD14 Pickled Coil (EN 10111)
European hot rolled forming grades, from DD11 for bending to DD14 for deep drawing.

Mild and Structural Pickled Coil
Chinese commercial and structural grades for racking, furniture, frames and general fabrication.

SS400 and S235JR to S355JR Pickled Coil
Structural grades with a guaranteed minimum yield, for load-bearing parts that are painted directly.

SPHT1 to SPHT4 Pickled Coil
Hot rolled grades for welded steel tube, used where tube makers need a clean strip surface.

Automotive Pickled Coil
SAPH370 to SAPH440 and QStE340TM to QStE420TM, for wheels, chassis and frame parts.
Example: SPHC hot rolled pickled coil, 2.0 mm × 1250 mm, cut to 1250 × 2500 mm sheets for powder-coated cabinets.
HRPO Coil Specifications
How to Decide on Pickled Coil
HRPO, Black Hot Rolled or Cold Rolled?
Pickling In-House or Buying HRPO?
What the Oil Film Does
Storage on Arrival
Reading HRPO Prices
Frequently Asked Questions
What is the full form of HRPO coil?
HRPO stands for hot rolled, pickled and oiled. It is hot rolled steel coil with the mill scale removed by acid pickling, then coated with a light oil film.
What is the difference between HRPO and CRC?
HRPO is hot rolled steel with the scale removed. CRC is rolled further at room temperature, so it is thinner, smoother and held to tighter tolerance. HRPO usually costs less.
What is pickled steel coil used for?
Pressed and formed parts that are painted or powder coated: brackets, housings, racking, furniture, compressor shells, wheels and chassis parts.
What thickness of HRPO coil can you supply?
The standard range is 1.5–6.0 mm, 1000–1500 mm wide. We can supply 1.2–8.0 mm and 750–1600 mm wide on request.
Can you cut HRPO coil into sheets?
Yes. We cut pickled sheets 300–2000 mm wide and 2000–6000 mm long, including 1219 × 2438 mm and 1250 × 2500 mm.
Do you supply automotive pickled coil?
Yes. We stock SAPH370 to SAPH440 and QStE340TM to QStE420TM as pickled coil.
Related Products



More in This Category
Request a Quote
We reply within 2–4 working hours with a price per ton, valid for 3 days.
