Home

/

/

Chequered Coil

Chequered steel coil with raised pattern

Chequered Coil

Hot rolled chequered steel coil with a raised anti-slip pattern, for floor plate, stair treads and vehicle floors. We cut coils into plates on our in-house processing lines, then ship them from our own warehouses.

Diamond, lentil, round bean, teardrop and combination patterns

Standard 1.8–12 mm thick; 1.5–16 mm on request

Standard widths 1250–1500 mm; 600–2000 mm on request

Mild and structural grades; quotations in 2–4 working hours

Why Buy Chequered Coil From MTS


Cut Into Floor Plates on Our Lines

We cut chequered coil into sheets up to 2000 mm wide and 2000–6000 mm long. You can buy full coils for your own leveler, or plates ready to install.

Five Patterns to Choose From

Diamond, lentil, round bean, teardrop and combination patterns cover most flooring and tread specifications. Tell us your pattern, or send a photo of the plate you use now.

Structural Grades When Load Matters

A mild steel grade (S235JR class) is the everyday choice. A 355 MPa structural grade gives higher strength for platforms and vehicle floors that carry heavy loads. A softer low carbon grade is the low-cost option for light-duty covers. The grade table lists each grade.

Coil Weight and ID That Fit

Standard hot rolled coils come on a 760 mm ID, with 610 mm available. We can rewind to suit your crane and decoiler.

Shipped From Three Ports

Processed orders ship in 8–12 working days from Shanghai, Qingdao or Tianjin.

Chequered steel coil with a raised pattern in the plant

A Floor That Grips, Rolled Into the Steel

Chequered coil is hot rolled steel with a raised pattern rolled into one side. The pattern gives grip for boots, tires and pallet wheels, even when wet or oily. The other side stays flat for welding to a frame.

Because the pattern is rolled in, not added later, chequered coil is a low-cost way to make anti-slip steel floors. Cut to length, it becomes chequered plate for walkways, stair treads, truck beds and machinery platforms.

Tell us where the plate will be used and the load it carries. You’ll get a recommended pattern, thickness and grade.

Request a Quote

Chequered Coil Patterns


Chequered steel coil with raised pattern

Diamond Pattern

The most common chequered pattern, with raised diamonds in a regular grid. Used for walkways, stairs and vehicle floors.

Chequered steel coil with raised pattern

Lentil Pattern

Oval raised bars at alternating angles. Popular for truck and trailer floors and industrial platforms.

Chequered steel coil with raised pattern

Round Bean and Teardrop Patterns

Rounded raised shapes that are easy to clean. Used for ramps, covers and equipment floors.

Chequered coil surface with a raised pattern

Combination Pattern

Mixed shapes for buyers who need a specific look or grip. Send a sample or photo to confirm.

Example: Mild steel diamond pattern chequered coil, 3.0 mm × 1250 mm, cut to 1250 × 2500 mm floor plates.

Chequered Coil Specifications


ItemStandardAvailable on request
Thickness (base)1.8–12 mm1.5–16 mm
Width1250–1500 mm600–2000 mm
GradesQ235B, Q355B, Q195—
PatternsDiamond, lentil, round bean, teardrop, combination—
Coil ID760 mm610 mm
Cut platesLength 2000–6000 mm—

Sizes outside the standard column need confirmation with us, and some are made to order.

How to Order Chequered Coil

Base Thickness, Not Overall Height

We quote chequered steel thickness as the base thickness, under the pattern. The raised pattern adds height on top. When you compare quotes or check weight, make sure everyone means the same thickness.

Coil or Cut Plate?

Buy coil if you run a cut-to-length line or need many plate lengths. Buy cut plates if you need a few sizes ready to install. Coil gives the lowest cost per ton; cut plates save you handling and leveling.

Choosing Thickness by Use

Light covers and trench lids often use the thinner range. Walkways and stair treads typically use mid-range thicknesses. Vehicle floors and heavy-duty platforms need thicker plate and often a 355 MPa grade. For thick plate beyond the coil range, see our chequered plate.

Rust Protection After Installation

Chequered coil is supplied black. For outdoor use, plan hot-dip galvanizing or painting after cutting and welding. The pattern holds coating well when the surface is cleaned first.

Frequently Asked Questions


What is chequered coil?

Chequered coil is hot rolled steel coil with a raised pattern rolled into one side for grip. It is cut into chequered plate for floors, stairs and vehicle beds.

Is chequered coil the same as checkered coil?

Yes. "Chequered" is the British spelling and "checkered" the American spelling of the same product.

What patterns of chequered coil do you supply?

Diamond, lentil, round bean, teardrop and combination patterns.

What thickness of chequered coil can you supply?

Standard base thickness is 1.8–12 mm, with 1.5–16 mm on request. Width is standard 1250–1500 mm, with 600–2000 mm on request.

Can you cut chequered coil into plates?

Yes. Plates are cut up to 2000 mm wide and 2000–6000 mm long on our own lines.

Request a Quote


We reply within 2–4 working hours with a price per ton, valid for 3 days.

Scroll to Top

Envíe su consulta hoy

Envíenos el grado, la medida, la cantidad y el puerto de destino que necesita. Para productos estándar, le enviamos una cotización en 2–4 horas hábiles.

Send Your Inquiry Today

Send us your required grade, size, quantity and destination port. For standard products, we will provide a quote within 2–4 working hours.