Carbon steel coil with strapping in the yard

SPHC Steel Coil (JIS G3131)

SPHC hot rolled steel coil for bending, light stamping and welded tube, made to JIS G3131. We slit and cut SPHC coil on our in-house processing lines, then ship it from our own warehouses.

Standard 1.5–6.0 mm thick; 1.2–12.0 mm on request

Common widths 1010, 1210, 1230, 1250, 1260 and 1500 mm

Black, or pickled and oiled; SPHD and SPHE drawing grades too

Mill test certificate to JIS G3131; quotations in 2–4 working hours

Why Buy SPHC From MTS


Cut to Your Width and Length

We slit SPHC coil into strip from 20 mm wide, with a width tolerance of ±0.2 mm. For sheets, we cut 300–2000 mm wide, flat to 5–7 mm per meter. You get material your tube mill or press can run straight away.

The Widths Tube and Strip Makers Ask For

We stock SPHC in 1010, 1210, 1230, 1250, 1260 and 1500 mm widths. Many tube mills and slitters plan around these sizes. On request, we supply widths from 900 mm to 1600 mm.

Stock for Steady Production

SPHC is one of the common grades in our 9,000 tons of carbon steel coil stock. You can plan repeat orders without waiting for a mill rolling slot.

Black or Pickled, Same Grade

Choose black SPHC for welded tube and parts that are blasted or galvanized. Choose pickled and oiled SPHC for direct painting and cleaner stamping. Both come on one quotation.

Shipped From Three Ports

Processed SPHC ships in 8–12 working days from Shanghai, Qingdao or Tianjin. Every container is photographed before it is sealed.

Hot rolled steel coils stacked in the warehouse

SPHC: The Workhorse Grade of JIS G3131

SPHC stands for Steel Plate Hot rolled Commercial. It is the commercial quality grade in JIS G3131, the Japanese standard for hot rolled mild steel plate, sheet and strip. Low carbon makes it soft, ductile and easy to weld.

Buyers choose SPHC when a part needs bending, roll forming or shallow pressing, but no designed strength. It is a standard feed for welded tube, cold formed sections, brackets, shelving and vehicle parts.

If your part is drawn deeper, SPHD and SPHE in the same standard give more formability. Tell us how you make the part, and we’ll confirm which of the three to buy.

Request a Quote

SPHC, SPHD and SPHE


Hot rolled steel coils in stock

SPHC – Commercial Quality

For bending, light pressing, roll forming and welded tube. Supplied black or pickled and oiled. Standard 1.5–6.0 mm thick, with 1.2–12.0 mm available.

Hot rolled steel coils in stock

SPHD – Drawing Quality

Lower carbon and phosphorus than SPHC, for moderate drawing. Supplied black or pickled and oiled.

Hot rolled steel coils in stock

SPHE – Deep Drawing Quality

The most formable of the three, for deeper pressings such as wheel discs and housings. Supplied black or pickled and oiled.

SPHC by Surface and Form


Black SPHC Hot Rolled Coil

As rolled, with mill scale. The usual choice for welded tube, structural brackets and parts that are blasted, galvanized or powder coated after descaling.

Pickled and Oiled SPHC

Acid pickling removes the scale, and a light oil film protects the surface from rust. Often written SPHC-P or SPHC-PO. Pickled coil runs from 1.5 mm to 6.0 mm, 1000 to 1500 mm wide.

SPHC Slit Coil and Cut Sheets

Narrow coils for tube mills and roll formers, or flat sheets for laser cutting and pressing. Cut sheets usually run 2000–6000 mm long.

Example: SPHC black hot rolled coil, 2.0 mm × 1250 mm, slit to 4 × 305 mm for welded square tube.

SPHC Specifications


ItemStandardAvailable on request
Thickness1.5–6.0 mm1.2–12.0 mm
Width1010 / 1210 / 1230 / 1250 / 1260 / 1500 mm900–1600 mm
Coil ID760 mm610 mm
Coil weight15–25 tmax. 28 t
SurfaceBlackPickled and oiled
Thickness toleranceJIS G3193ASTM A568, EN 10051 on request

Sizes outside the standard column need confirmation with us, and some are made to order.

How to Order the Right SPHC

Is SPHC Strong Enough?

SPHC has no guaranteed yield strength. It is a forming grade, not a structural grade. If your drawing states a minimum yield strength, order a structural grade such as SS400, A36 or S235JR instead.

SPHC or SPHD / SPHE?

Start with SPHC for bending, tube making and shallow pressing. It costs the least. If parts split or neck on the press, the draw is too deep for commercial quality. Move to SPHD, or to SPHE for the deepest draws.

Black or Pickled SPHC?

Mill scale is fine for welded tube and for parts that are blasted or galvanized. For direct painting, powder coating or clean stamping, pickled and oiled SPHC avoids scale flaking and saves you a pickling step.

SPHC or Cold Rolled SPCC?

Above about 1.5 mm, SPHC is usually the cheaper choice. Below that, or when you need a smooth visible surface and tight gauge, cold rolled SPCC is the better buy. Between 1.5 mm and 2.0 mm, we have hot rolled, pickled and cold rolled coil in stock, so you can compare.

Ordering to JIS G3131 Outside Japan

Many buyers in Southeast Asia, the Middle East and Latin America order SPHC. Their drawings and dies often came from Japanese designs. If your customer accepts an equivalent such as DD11, tell us; it can widen the choice of stock sizes.

Frequently Asked Questions


What is SPHC steel?

SPHC is a hot rolled low carbon steel grade in JIS G3131. The letters stand for Steel Plate Hot rolled Commercial. It is soft and easy to bend and weld, and is used for tube, brackets and light pressings.

What is JIS G3131?

JIS G3131 is the Japanese Industrial Standard for hot rolled mild steel plates, sheets and strip. It covers the forming grades SPHC, SPHD, SPHE and SPHF, from commercial to deep drawing quality.

What is the equivalent of SPHC?

The closest European grade is DD11 (EN 10111). In the US, SAE 1006 / 1008 or ASTM A1011 commercial steel are used for similar parts. They are close equivalents, not identical grades.

What is the difference between SPHC and SPCC?

SPHC is hot rolled, to JIS G3131. SPCC is cold rolled, to JIS G3141. SPCC is thinner, smoother and held to tighter tolerance, and costs more per ton.

What does SPHC-PO mean?

It is a common trade name for SPHC hot rolled coil that has been pickled and oiled. The steel grade is the same; only the surface condition differs.

What thickness of SPHC coil can you supply?

The standard range is 1.5–6.0 mm. We can supply 1.2–12.0 mm on request; sizes outside the standard range need confirmation with us.

Request a Quote


We reply within 2–4 working hours with a price per ton, valid for 3 days.

Scroll to Top

Envíe su consulta hoy

Envíenos el grado, la medida, la cantidad y el puerto de destino que necesita. Para productos estándar, le enviamos una cotización en 2–4 horas hábiles.

Send Your Inquiry Today

Send us your required grade, size, quantity and destination port. For standard products, we will provide a quote within 2–4 working hours.