Carbon Steel Coil
Hot rolled and cold rolled carbon steel coil, processed to your width, length and coil weight on our in-house processing lines. Common sizes ship from stock; others are rolled to order.
20 cut-to-length, 10 slitting and 7 recoiling lines, processing 100,000 tons a month
9,000 tons of carbon steel coils in stock in our own warehouses
Hot rolled 1.2–20 mm and cold rolled 0.3–3 mm as standard ranges
Mill test certificate with every coil; quotations in 2–4 working hours
Why Buy Carbon Steel Coil From MTS

Processed Before It Ships
You receive steel your line can run on the day it arrives. We slit coils up to 14 mm thick and down to 20 mm wide. For sheets, we cut 0.25–16 mm thick, 300–2000 mm wide and 2000–6000 mm long.

Coils Sized to Your Decoiler
Hot rolled coils come on a 760 mm ID as standard, cold rolled on 508 mm. Both are also available on 610 mm. Tell us your crane limit and we rewind to suit. For thin gauges, we can split coils down to a few hundred kilograms.

Stock You Can Load This Month
We keep 9,000 tons of hot rolled, cold rolled and pickled coil in stock, so common sizes ship fast. Between 1.5 mm and 2.0 mm, we stock all three. You choose by surface and budget, not by availability.

Flat Sheets Without Rework
We level sheets to 5–7 mm/m flatness and cut them to ±2–3 mm length tolerance. You can load them onto your laser or press brake straight from the bundle.

One Order, Several Products
You can load hot rolled, cold rolled, pickled and slit coils in one container. Processed orders ship in 8–12 working days from Shanghai, Qingdao or Tianjin.

Rolled Steel Coil That Cuts Your Cost Per Part
Most carbon steel coil does not stay a coil. It is slit into strip, leveled into sheets, or fed straight into a tube mill, roll former or press. Buying rolled steel coil instead of cut sheets lets you cut only the lengths you need. Yield goes up and offcuts go down.
That saving only holds when the coil suits your equipment. A wrong ID, a coil too heavy for your crane, or wide edge trim can cost more than the price gap.
So we start with your line, not our stock list. Send us the end product and the machine you run. We'll recommend hot or cold rolled, grade, width and coil weight together. No slitter or leveler in your plant? We slit or cut the coil here and ship it ready for you to use.
Request a QuoteCarbon Steel Coil by Rolling Process

Hot Rolled Coil (HRC)
The workhorse for structural parts, welded pipe, chassis members and plate cutting. Standard 1.2–20 mm thick and 1250–2000 mm wide. Grades include ASTM A36, SS400, SPHC and S235JR–S355JR.
Request a Quote View Details
Cold Rolled Coil (CRC)
Cold reduced for a smooth surface and tight gauge. Standard 0.3–3 mm thick and 1000–1500 mm wide, with 0.2–4 mm available. Supplied annealed (CRCA) for forming, or full hard (CRFH), in SPCC, DC01 to DC05 and ST12.
Request a Quote View Details
Pickled and Oiled Coil (HRPO)
Hot rolled coil with the scale removed and a light oil film. It paints and forms well at a lower cost than cold rolled. Standard 1.5–6.0 mm thick, in SPHC, SPHD, SPHE, DD11–DD14 and S235JR–S355JR.
Request a Quote View Details
Automotive Hot Rolled Coil
High-strength grades for frames, wheels and chassis parts: SAPH, QStE and truck frame steel.
Request a Quote
MC High-Strength Steel Coil
Cold-forming high-strength coil from S315MC to S700MC, to EN 10149-2, for trailer chassis, crane parts and formed sections.
Request a Quote View DetailsCarbon Steel Coil by Grade and Use

Mild Steel Coil
Low carbon steel coil in SAE 1006, SPHC, SPCC and similar grades. It bends, stamps and welds easily. In these grades, MS sheet coil is our most common order from tube mills and roll formers. Example: SS400 hot rolled mild steel coil, 2.5 mm × 1250 mm. For the JIS and EN forming grades, see SPHC Steel and DC01 Steel.
Request a Quote
Structural Steel Coil for Construction
S235JR, S275JR, S355JR and ASTM A36 for load-bearing parts. Steel coil for construction is roll-formed into purlins, decking and light-gauge framing, or cut into base plates and brackets. For the American grade, see A36 Hot Rolled Coil.
Request a Quote
Corten Steel Coil
Weathering steel coil in SPA-H, 09CuPCrNi-A and Q450NQR1. It forms a stable rust layer outdoors. Standard 2–8 mm thick and 1250 or 1500 mm wide, used for containers, facades and rail cars. Also supplied as slit strip.
Request a Quote
High Carbon Steel Coil
SK85 (SK5) or SK95, 2.0–4.0 mm, and manganese spring steel coil, 2.5–10 mm. Used for blades, springs, saw parts and farm tools after heat treatment.
Request a Quote View Details
Chequered Coil
Hot rolled coil with a raised pattern: diamond, lentil, round bean, teardrop or combination. Standard 1.8–12 mm thick in mild and structural grades, for floor plate, stair treads and truck beds.
Request a Quote View DetailsSilicon Steel Coil
Grain oriented 27Q and 30Q, non oriented 35W, and M-series electrical steel, 0.20–0.50 mm thick. Used for transformer cores and motor laminations. Tell us the core loss grade you need, and we'll quote it.
Request a QuoteCarbon Steel Coil by Form

Master Coil
Full-width coil as rolled, for plants with their own slitting or cut-to-length lines.
Request a Quote
Slit Coil
Master coil slit into narrow coils for tube mills, roll formers and stamping. Width tolerance is ±0.2 mm as standard. For example, HR slit coil, 3.0 mm × 182 mm, for welded square tube. Narrow widths and precision tolerances are on our Carbon Steel Strip page.
Request a Quote
Sheet in Coil
Sheet-width coil, usually 1000–1500 mm, for plants that cut their own sheets. If you prefer flat sheets, see Carbon Steel Plate.
Request a QuoteSpecifications and Ordering Details
Item
Hot rolled
Cold rolled
Standard thickness
1.2–20 mm
0.3–3.0 mm
Available thickness
0.8–25.4 mm
0.2–4.0 mm
Standard width
1250 / 1500 / 1800 / 2000 mm
1000 / 1250 / 1500 mm
Available width
800–2050 mm
700–1850 mm
Coil ID
760 mm (610 mm available)
508 mm (610 mm available)
Coil weight
15–25 t (up to 28 t)
5–10 t (3–15 t)
Coil OD
about 2000–2180 mm
about 2000–2150 mm
Edge
Mill edge or slit edge
Mill edge or slit edge
Thickness tolerance
ASTM A568, EN 10051, JIS G3193, GB/T 709
ASTM A568, EN 10131, JIS G3141, GB/T 708
Sizes outside the standard range need confirmation with us. Coils over 20 mm are rare, heavy and made to order; they are supplied as full coils only.
How to Specify a Carbon Steel Coil Order
Hot Rolled, Pickled or Cold Rolled
Hot rolled coil is the lower-cost option. Choose it when mill scale and wider gauge tolerance don't matter, or when the part will be painted, galvanized or welded. Most structural and pipe work runs on it.
Cold rolled coil costs more per ton, but gives a smoother surface and much tighter thickness tolerance. Choose it for visible parts, deep drawing and most gauges under about 1.5 mm.
Pickled and oiled coil sits between the two. Choose it when you need a clean surface for painting or forming, but not cold-rolled tolerance. Pick cold rolled when precision and surface matter most; hot rolled or pickled when cost matters most.
Choose the Grade by What Happens After Delivery
For bending, stamping and tube making, a mild steel coil such as SAE 1006, SPHC or SPCC is the safe choice. Low carbon means good weldability and little springback.
For load-bearing parts, specify a structural grade with a guaranteed yield strength. S235JR, S355JR and ASTM A36 are the common ones. Name the standard as well as the grade, because equivalents are close but not identical.
For deep-drawn parts, step up the drawing grade: DC03, then DC04, then DC05. Each step forms deeper without cracking, at a slightly higher price.
Match the Coil to Your Decoiler
Before comparing prices, check three numbers on your line: decoiler ID range, maximum coil OD and crane capacity.
A hot rolled mill coil can weigh up to 28 tons and sits on a 760 mm ID. Many smaller plants can't handle that. If yours can't, we rewind or split the coil before shipping. That costs less than modifying your line.
How Long Is a Coil?
You can estimate coil length from weight, thickness and width:
Length (m) = Coil weight (kg) ÷ [Thickness (m) × Width (m) × 7850]
Example: a 10-ton coil, 2.0 mm × 1250 mm, is about 10,000 ÷ (0.002 × 1.25 × 7850) ≈ 510 m. Use this to check how many parts one coil gives and how often your line stops for a coil change.
Master Coil, Slit Coil or Cut Sheets
Buy master coil if you run your own slitter or leveler and use several widths. Buy slit coil if your tube mill or roll former needs one fixed width. Buy cut sheets if your volumes are small or you have no uncoiling equipment.
Slitting here costs less than shipping trim scrap across the sea. Tell us all the widths you use, and we will plan the slitting pattern for the least edge loss.
When Coil Is the Wrong Form
Bare carbon steel rusts. For outdoor parts, roofing or ducting, a coated coil saves a painting step. See our Galvanized Steel Coil and PPGI Coil instead.
Above 20 mm, steel is usually supplied as plate, not coil. Coils of 20–25 mm exist but are rare and hard to level. For heavy sections, see Carbon Steel Plate.
Storage on Arrival
Cold rolled coil is oiled, but it still rusts if it gets wet or sits in humid air. Store coils indoors, off the floor, and use the oldest coils first. Hot rolled coil tolerates storage better, but heavy rust spoils the surface for painting.
Frequently Asked Questions
What is carbon steel coil?
Carbon steel coil is flat rolled steel, wound into a continuous coil. Carbon is the main alloying element, usually below 0.25% for mild grades. It is supplied hot rolled, pickled or cold rolled, then slit, leveled or fed directly into forming lines.
What is the difference between HR and CR coils?
HR coils are rolled hot, so they carry mill scale and wider tolerances at a lower price. CR coils are rolled again at room temperature. That gives a smoother surface, tighter gauge and thinner sizes. HR suits structural and welded work; CR suits visible and formed parts.
Is mild steel coil the same as carbon steel coil?
Mild steel coil is one type of carbon steel coil. "Mild" means low carbon, such as SAE 1006, SPHC or SPCC. Carbon steel coil also covers structural grades like S355JR, and high carbon grades like SK85.
What affects carbon steel coil price?
Rolled steel prices follow the hot rolled coil market. Cold rolling, grade, thickness and width then add to the base. Thinner gauges cost more per ton. Slitting, leveling and packing add a processing charge. Send your specification for a per-ton price within 2–4 working hours.
Can I order small coils?
Yes. We rewind master coils into smaller coils on our recoiling lines. Thin gauges can go down to a few hundred kilograms per coil. For thicker gauges, tell us your lifting limit and we will confirm the smallest coil weight we can make.
How long does delivery take?
Coils from stock ship fastest. Processed coils usually take 8–12 working days. Grades and sizes rolled to order take about 2–3 months. Sea freight leaves from Shanghai, Qingdao or Tianjin.




